This is my homemade body car as the experiment for later on trying to design and build a 1/25 Piper Cub/like model airplane. As you plane guys know there are few 1/25 size kits to work with, and 99% of plastic model airplanes are war planes -- of little interest to me.
So ..... I fashioned this slab sided body, held together by " formers or bulkheads " at the firewall and rear window positions, and used my parts box for everything else. I learned that it is a doable project, but that I must I must get a much better fit of the parts.
It has been probably the most fun model I ever built. It got third in the open wheel comp class at Memphis.
Part brushed part sprayed, some decals and some hand lettering.
Hope you like it.
(https://i.postimg.cc/ykxj5tzz/Wacky-Racer2.jpg) (https://postimg.cc/ykxj5tzz)
(https://i.postimg.cc/Yvm32F9n/Wacky-Racer3.jpg) (https://postimg.cc/Yvm32F9n)
Click on thumbs for larger view.
John, the Evergreen sheets can be bent pretty easily as long as you have a nice straight edge to get the crease going. Also, small Evergreen angle pieces and flat pieces glued in from the inside really help. Finally, you can overlap joints and then sand down the excess from the inside. Lot's of little "tricks" that really help tighten things up. By the way, congrats on the award!
Another good one from John! Way to go, keep on having fun!
Rett
An original, one-of-a-kind model. Keep up the good work John!
Nice build John, It's really great seeing you back building again and having fun.
Bob
Thanks to everyone. Appreciated.
I seen at our show it look really nice
NEAT! Congrats on the award and great scratch building, wish I was that talented!
Al
WOW...
NICE one John!!
Great Fab job@@